How does facade cleaning differ from window cleaning?

Window cleaning covers glass, frames, sills and shopfronts — billed per window or per m² of glass. Facade cleaning is the entire building elevation: glass and aluminium surfaces, clinker, render, stone, soffits and flashing. We often combine both into one job — the same crew cleans the facade and the glazing on the same date, which cuts the access cost (the lift or rope-access team mobilizes once).

Do you clean facades at height?

Yes. Up to around the 4th floor we work from ground level with water-fed poles and demineralized water — no scaffolding. Higher facades are cleaned from a basket lift or with rope-access techniques. Height work is carried out with certified rope-access partners — under a single contract with Reefa and liability insurance up to 1,000,000 PLN.

What method do you use? Won't pressure damage the render?

We match the method to the surface. Render and insulation systems are soft-washed — low pressure with neutral chemistry, because a high-pressure jet can damage the facade layer. Clinker and brick tolerate controlled pressure washing. Glass and aluminium facades are cleaned with demineralized water, which dries without streaks or deposits. Natural stone needs chemistry matched to the stone type — we assess that during the survey.

How often should a building facade be cleaned?

As a guide: glass and aluminium office facades — 1–2 times a year, render — every 2–4 years, clinker — every 2–3 years. In Krakow and the Silesian Agglomeration cycles tend to be shorter: heating-season smog and industrial dust settle on facades faster than in cities with cleaner air. For regular clients facade cleaning goes into the property's annual schedule.

Do you remove green film and algae from walls?

Yes. Green film, algae and organic soiling — typical for north-facing and shaded walls — are removed by soft washing with chemistry designed for biological soiling. It's a standard element of cleaning rendered and insulated facades.

Is the property manager's or community's consent needed?

We work on the order of the owner, property manager or a tenant with title to the building — that part is on the client. We take on the organizational side: agreeing working hours, protecting the pavement and the zone around the building, and for lift work we help coordinate access and parking spots with the administration.

Do you clean facades after construction or renovation?

Yes. We remove construction dust and run-off stains after building works — most often together with post-construction cleaning and window restoration, as one handover package before the building is delivered. Scope and the per-m² rate are set after a survey.

Czysta szklana fasada budynku po myciu — mycie elewacji i fasad Reefa Kraków i Katowice

Reefa specialty · Katowice

Facade cleaning in Katowice.

Glass, aluminium, clinker, render and stone — including work at height

Call 737 576 876

50+

properties served

from 1200PLN

month

15min

response

Service scope

What's included in facade cleaning

Cleaning glass and aluminium-glass facades with demineralized water (streak-free, no deposits)
Cleaning rendered facades, including insulation systems — soft washing at low pressure
Controlled pressure washing of clinker and brick facades
Cleaning natural-stone facades with neutral chemistry matched to the surface
Removing green film, algae and organic soiling from walls
Cleaning facade panels, sheet cladding and composite cladding
Facade cleaning up to ~4th floor from ground level (water-fed poles with demineralized water)
Facade cleaning at height from a basket lift or by rope access (certified partners, single contract with Reefa)
Cleaning glazing and shopfronts that form part of the facade — bundled with window cleaning
Cleaning soffits, cornices, exterior sills and flashing
Cleaning signage, light boxes and entrance canopies
Post-construction facade cleaning (construction dust, run-off stains)

01 / 01

Facade cleaning in Katowice and the GZM — how is it different from the rest of Poland?

In Katowice and the GZM cities facades work in the toughest conditions in Poland — the agglomeration's industrial and traffic dust settles on elevations all year round, and smog adds to it in the heating season. The effect is visible to the naked eye: a grey film on render and glass appears faster than the national average, and light-coloured office facades lose their colour within a few seasons. Silesian architecture also means a lot of brick and clinker — surfaces that tolerate controlled pressure washing but need different chemistry than render or an aluminium facade. Reefa has operated in Katowice since 2024 and cleans the facades of Śródmieście and Culture Zone office buildings, housing-community buildings and commercial properties — also in Chorzów, Sosnowiec, Gliwice, Zabrze and Tychy, with no logistics surcharges within the agglomeration.

We match the method to the surface: glass and aluminium facades — demineralized water from poles or a lift; render and insulation systems — soft washing at low pressure; clinker and brick — controlled pressure. Up to around the 4th floor we work from ground level; higher — a basket lift or certified rope-access partners under a single contract with Reefa and liability insurance up to 1,000,000 PLN. The per-m² facade rate is quoted after an on-site survey; when facade cleaning is combined with window cleaning or a standing cleaning contract, service agreements start from 1200 PLN net monthly.

Four pillars

Why choose Reefa.

Method matched to the surface

Glass, clinker and render are cleaned differently — the wrong method can easily damage a facade. We choose the technique and chemistry after a survey: demineralized water, soft washing or controlled pressure.

Height without scaffolding

Up to ~4th floor we work from ground level. Higher — a basket lift or certified rope-access partners under a single contract with Reefa. Always the cheapest safe method.

Liability cover 1,000,000 PLN

Work at height and on facades is covered by liability insurance up to 1,000,000 PLN — important for building managers, housing communities and office tenants.

Facade and windows in one job

We clean the facade and the glazing on the same date, with one crew — one B2B contract, one VAT invoice, one coordinator watching the schedule.

Service area

Districts in Katowice.

We serve properties in every district of Katowice, with full on-site staffing.

ŚródmieścieLigotaBrynówBoguciceZawodzieGiszowiecNikiszowiecDąbrówka MałaWełnowiecKoszutkaOchojecZarzecze+ Silesian Agglomeration

Comparison

Reefa vs. a typical cleaning company.

Feature	Reefa	Typical company
Permanent staff assigned to property		rotating
Dedicated coordinator		call center
QR-code reporting system
Property profile document
Certified eco supplies		partial
Liability insurance 1,000,000 PLN		lower
Price fixed before start		can grow
Client retention > 1 year		50–60%

From

1200PLN/month

Facade cleaning is quoted individually after a survey — the per-m² rate depends on height, surface type, access and soiling. From 1200 PLN/month applies to standing service contracts combining the facade with window cleaning or property cleaning.

Updated: July 2026

Send inquiry

Guarantees

Properties served: 50+
Client retention: 91%
In Katowice since: 2024
Liability insurance: 1 000 000 PLN
Eco supplies: EU Ecolabel
Response time: 15 min

Working with us

1
Inquiry
Write or call: address, number of storeys, facade type (glass, render, clinker, stone), ideally with photos. We respond in 15 minutes.
2
Survey and quote
We assess the surface, access and soiling level on site. The per-m² facade rate is given after the survey — no hidden costs.
3
Method and date
We choose the technique (demineralized water, soft washing, pressure, lift, rope access) and a date that suits the weather and the property manager.
4
Execution
We protect the building surroundings and joinery, and clean the facade per OSH rules. Work at height is done by certified partners under Reefa supervision.
5
Handover
You check the result with us. For managers and office buildings we propose a cyclical schedule — the coordinator reminds you of the next wash.

Questions

Short answers.

Can't find your question? Write us — we respond in 15 minutes.

Facade cleaning is quoted individually after an on-site survey — billing is a per-m² facade rate. Four factors drive the price: building height, surface type (glass, aluminium, clinker, render, stone), access (ground level, lift, rope access) and soiling level. With a standing service contract combining the facade with window cleaning or property cleaning, budgets start from 1200 PLN net monthly. We prepare a preliminary quote from photos and the address.

Other services in Katowice

Window cleaning

from 15 PLN/m² (one-time)

Post-construction cleaning

from 20 from 15 PLN/m²

Office building cleaning

from 1200 PLN/month

Dedicated solutions for your sector

For Property Managers

Free quote

Start with one conversation.

On-site audit in 48 hours. Quote with no commitment. Service starts in 5–7 days.

Send inquiry 737 576 876